Download 1. GENERAL CHARACTERISTICS

Transcript
INSTALLATION OF A CONDENSATE
RECOVERY POT AT
THE DAMPER DISCHARGE
Procedure
− Withdraw the bottom of the lower oven
− Withdraw the plug obstructing the side of the T joint located near the
damper
− Place the pot under the damper
(seal the pot/damper)
(completely unscrew the screws located under the pot)
− Screw the nut on the pot tube discharge on the free side of the
T (do not forget to carry out sealing)
− Make sure the pot is securely fastened on the damper by tightening
the screws of the pot
RUBIS OVEN
16652
User manual
Page 42