Download 1. GENERAL CHARACTERISTICS

2-2
Starting-up
Refer to chapter 3 before using the oven.
Recommendations for use are given in the description of the controls.
You must dry the cement sole plates of the decks before using the oven. To
do this, procead as follows:
− Half open all the doors. The doors handles must be at centre left
position.
− Switch on the oven by pressing button (1). Turn the temperature
control dial to 100°C/210°F.
− Wait for 2 hours counting from when the green control lamps (on the
controller) switches off.
− Increase the temperature by steps of 50°C/120°F every 2 hours until
reaching 250°C/480°F.
− Wait for 2 hours at 250°C/480°F.
− Your oven is now ready for use.
16652
RUBIS OVEN
Page 9
User manual