Download DSP56156 User Manual - Freescale Semiconductor
Transcript
Freescale Semiconductor, Inc. ON-CHIP CODEC FREQUENCY RESPONSE AND GAIN ANALYSIS In the present example, with D=128 and F=2.048 MHz, the frequency response of this second order comb filter is: Freescale Semiconductor, Inc... 2π × 128 2 sin --------------------×f 2 × 2048 1 F ( f ) = ---------------2- -------------------------------------------- ( 128 ) 2π - × f sin -------------------2 × 2048 The frequency response of the interpolation DSP filter can be shaped by 1/F(f) in order to flatten the D/A section response. Table 6-10 gives an example of a 4 biquad IIR low pass filter whose transfer function has been shaped accordingly.Figure 6-14 shows the filter frequency response and the effects on the overall D/A section response. Table 6-10 Example of a Four Biquad IIR Interpolation and Compensation Filter ; Source filter file: “comp1282nd.IIR.Filter” _filter_type _NSTAGES equ equ BIQUAD_FILTER_TYPE 4 ; number of stages dc $0270 ; Biquad stage no. 1 dc $e722 dc $16e0 dc $329e dc $43d3 ; Biquad stage no. 2 dc $d947 dc $13eb dc $1014 dc $1146 ; Biquad stage no. 3 dc $f1a9 dc $30ad dc $3603 dc $4614 ; Biquad stage no. 4 dc $c72a dc $0a66 dc $2f25 dc $1c8f NOTE: 6 - 28 ; gain = 0.03807147513/2 ; -d2_1 = -0.3885309315/2 ; -d1_1 = 0.3574372286/2 ; n2_1 = 0.7908895273/2 ; n1_1 = 1.059754603/2 ; -d2_2 = -0.6050537737/2 ; -d1_2 = 0.3112185033/2 ; n2_2 = 0.2512476586/2 ; n1_2 = 0.2698979411/2 ; -d2_3 = -0.2240856408/2 ; -d1_3 = 0.7605800752/2 ; n2_3 = 0.8439490258/2 ; n1_3 = 1.094956692/2 ; -d2_4 = -0.8880624617/2 ; -d1_4 = 0.162456827/2 ; n2_4 = 0.7366593399/2 ; n1_4 = 0.4462262322/2 This filter, as well as all the figures representing filter responses, has been generated using ZOLA Technologies, Inc., DSP Designer software package. DSP56156 ON-CHIP SIGMA/DELTA CODEC For More Information On This Product, Go to: www.freescale.com MOTOROLA