Download User Manual E-DriveTM - Mold

Transcript
Magnetic Valve Pin Option
3.2 Extraction Option 2: Place Extraction Tool EXTOOL13A on top of valve pin holder. Couple Extraction Tool EXTOOLAS01 with EXTOOL13B and extract Mag-Pin Assembly.
EXTOOL13B
EXTOOL13A
4. If the valve pin gets stuck and the mechanism detaches from the magnet interface, you may follow one of
the options given on the next page.
Early disengagement of valve pin.
EARLY DISENGAGEMENT
OF Valve Pin
E-Drive User Manual
Not under documentation control if printed. May be revised without notice Electronic version is available at www.moldmasters.com
6-11
Revision 05
©09-2010