Download User Manual E-DriveTM - Mold

Introduction
Section 1 - Introduction
We would like to take this opportunity to thank you for purchasing a Mold-Masters® E-Drive™system.
The purpose of this manual is to assist users in the integration, operation and maintenance of their
E-Drive system. This manual also provides information related to the Mag-Pin (Magnetic Valve Pin
Holder) option.
Symbols Used in the Manual
GENERAL DESCRIPTION OF SYMBOL
WARNING
Indicates an immediate or potentially hazardous situation, which if not
avoided, could result in a serious injury or death.
CAUTION
Failure to follow instructions may damage equipment
NOTE
Indicates additional information or used as a reminder
Warranty and Documentation
Please check with your original order documentation for warranty details.
NOTE
Please do not return any parts to Mold-Masters without prior pre-authorization and a return authorization number supplied by Mold-Masters (2007) Limited.
Documentation will include one or more of the following:
• Information on the Mold-Masters E-Drive system in general and information on the Mag-Pin
(Magnetic Valve Pin Holder) option.
• Parts list contains all system components. Together with the general assembly drawing, the
parts list should be referenced when ordering spare parts.
• General assembly drawing used to integrate your E-Drive system into the mold.
WARNING
This manual must be used in conjunction with any appropriate Machine, Hot Runner, and
Temperature Controller User Manual.
When ordering this manual, please reference document number: EMMEDUM05.
Release Details
Document #
EMMEDUM05
Release Date
Version
8 September 2010
05
E-Drive User Manual
Not under documentation control if printed. May be revised without notice Electronic version is available at www.moldmasters.com
1-1
Revision 05
©09-2010