1
Download MP3000E-Basic Interface Control w/UBOB Pages 1
Transcript
MP3000 Setup Home and limit switch hook ups Typical connections for Homes and Limits All of the inputs are opto isolated and map to a specific pin on the parallel port(s). In reality you can use any input for any signal. Inputs are not fast enough for Encoder feedback faster than a few pulses per second. The inputs use a “floating” ground (+12 return). If you need more inputs than the 8 (9 with EPO) then a PORT 2 card can be hooked to the UBOB and the added Aux and BHome inputs will work with a second parallel port. Normally closed contacts For far limits. Wired in series NC C C NC C YHome C NO XHome ZHome T17 T3 UP T4 EPO T11 ARC OK J1 C14 K5 D15 BHOME AUX1 K3 D3 K4 J13 R1 AUX2 DANGER! J18 J12 AUX3 J8 AUX4 QUAD RELAY HEADER is for an optional quad relay card and adds 4 more relays to the outputs. J5 NO Com2 Com1 48 C11 J11 DANGER! R2 NO J7 K4 J4 C10 Xhome YHome D2 C1 10 13 25 C&CNC 47 TABLE I/O REV 6 J6 T13 K4 C13C12 QUAD RELAY J33 K3 D9 6 1 J10 T15 ZHome AHome LIMITS DWN AUX0 UP 14 1 J9 T12 C2 T10 AUX0 DOWN T2 T19 T20 T21 T14 ARC OK LIMITS AHome C9 T16 C4 C3 T18 ZHome T6 NO C NO YHome T5 52 T7 C5 T8 C8 PLUG C7 C6 J2 T9 C Xhome JUMPER EPO to be able to bring MACH out of RESET NC
