Download LINK/2+ Integrated Connectivity Systems User`s Guide

Define Integrated Trunk Module Bundle Parameters (DEF BDL NPR,
DEF BDL PR) Commands
The DEF BDL NPR and DEF BDL PR commands display the current Integrated Trunk Module
bundle configuration parameters and allow the user to change parameter values in the database for
the specified Integrated Trunk Module. The DEF BDL NPR command displays the current
nonproprietary bundle parameters; the DEF BDL PR command displays the current proprietary
bundle parameters. The commands are always issued to the master DS-0 of any bundle.
Commands:
[NOD xxxx] DEF BDL NPR {* or 1:ss:cc[-1:ss:cc]...[,1:ss:cc[-1:ss:cc]]}
[NOD xxxx] DEF BDL PR {* or 1:ss:cc[-1:ss:cc]...[,1:ss:cc[-1:ss:cc]]}
After the command is entered, the supervisory port displays the current nonproprietary, Figure 63A, or proprietary, Figure 6-3B, bundle parameters for the specified Integrated Trunk Module.
Select new parameters per "Making Menu Selections" paragraph in Chapter 3, General
Information. See the Integrated Trunk Parameters chapter in the Configuration Planning Manual
for parameter values.
If more than one channel or a range of channels is entered in the command, the supervisory port
displays the parameters of the first channel specified. After the new parameter values have been
entered, the parameters of all specified channels will be overwritten with the bundle parameter
values that are displayed.
NOTE:
Channels must be disconnected before the DEF BDL NPR command is
issued. After the command is issued, the bundle must be reconnected
for the changes to take effect.
Channels should be disconnected before the DEF BDL PR command
is issued. After the command is issued, reset the bundle with the RST
BDL command to effect the changes. The channels must then be
reconnected.
If a DS-0 channel is connected when a remote DEF BDL NPR
command is issued, the command is aborted and the message
"CONNECTION EXISTS, CMD ABORTED" is displayed.
If a DS-0 channel within a range is connected, execution of a local
DEF BDL NPR command will update only the disconnected channel
parameters.
The Integrated Trunk Module proprietary bundle uses only frame
mode 2.
6-54
L2UG
6/30/94