Download LINK/2+ Integrated Connectivity Systems User`s Guide
Transcript
Adding Modules In general, adding a module requires the following activities: ● If a module must be removed or relocated before the new module can be installed, use the DEL command to delete database entries for the module being removed. ● Use the RMV and INS commands to logically remove and insert modules. ● Define database parameters for the modules that have been added or relocated: - For Interlink Modules, define intermachine link parameters and routing tables. See Tables 6-4 and 6-5. - For Integrated Trunk Modules, define DS-1/E-1 parameters, bundle configurations, proprietary and nonproprietary bundle parameters, channel connections, D-channel parameters, and routing tables. See Tables 6-4 and 6-5. - For Voice Processors, define DS-1/E-1 parameters, quality parameters, DS-0 channel parameters, and channel connections. See Tables 6-6, 6-7, and 6-12. - For Channelized Services Processors, define DS-1/E-1 parameters, quality parameters, master DS-0 channel parameters, bundle configuration, and channel connections. See Tables 6-8, 6-9, 6-10, and 6-12. - For Voice Server Modules, use the SET VSM command to define the module. - For I/O modules, define channel connections and parameters. See Tables 6-11 and 6-12. - For X.50 Server modules, use SET XSM command to define the module, then define channel connections and parameters. See Table 6-18. For more detailed information on adding modules to an existing LINK/2+ System, see Installing Additional Modules chapter in the LINK/2+ Installation and Maintenance Manual, which provides step-by-step procedures covering the physical installation as well as the programming activities required for each type of module. L2UG 6/30/94 6-15
Related documents
青森県燃費計貸出要領
Cisco UBR924 - uBR 924 Router Installation guide
E2 and Square D Smart Breaker Panel Installation
Synchrony Cell Exchange User`s Guide
3Com MSR 50-40 Multi-Service Router Chassis Modula (0235A297US)
tia/eia systems bulletin - Telecommunications Industry Association
Square D Smart Breaker Panel Control Manual (026
User`s Manual
Advanced Testing and Troubleshooting for Carrier
User and reference manual
IS-SPX-1000 Inspired Signage XPress Player - Operation
CX-1500 Manual - Tangent Communications