Download Network Gateway Implementation and Operation
Transcript
2.1.3 2.1.3 Cable Selection at the Local LCN For each "local" NG responsible and alternate pair, you will have to define which cable, A/B, is primary for transmission. This adds the final element to our hypothetical configuration: "Local" LCN 1 1 1 Primary Cable A A A Primary NG 17 18 19 Alternate NG 18 19 20 "Remote" Responsible Alternate LCN Server Server 2 5(NG 21) 6(NG 22) 3 9(NG 25) 10(NG 26) 4 13(NG 29) 14(NG 30) 2 2 2 B B B 21 22 23 22 23 24 1 3 4 1(NG 17) 2(NG 18) 10(NG 26) 11(NG 27) 14(NG 30) 15(NG 31) 3 3 3 A A A 25 26 27 26 27 28 1 2 4 2(NG 18) 3(NG 19) 6(NG 22) 7(NG 23) 15(NG 31) 16(NG 32) 4 4 4 B B B 29 30 31 30 31 32 1 2 3 3(NG 19) 4(NG 20) 7(NG 23) 8(NG 24) 11(NG 27) 12(NG 28) The preceding example is not intended to be a recommendation. Rather, it was chosen to show the type of planning that must go into your preparation as size and complexity of a network increases. 2.2. ASSIGN IDENTIFIERS TO NETWORK ELEMENTS To each LCN system— Assign a "Local System Number" (1-64) that uniquely defines this LCN system within the network. This number is used in LCN configuration and in some LCN displays. Assign a "System Title" (1 or 2 alphanumeric characters) that uniquely defines this LCN within the network. The System Title must have at least one alpha (non-blank, non-numeric) character. The System Title is used to identify the LCN in the extended point.parameter name form used in addressing remote data. The System Title is separated from the point name by a backslash delimiter. For example: id\pt_nam.param_nm Assign a 20-character "System Description" that will further identify that LCN on Universal Station displays. To each NG— Assign a PIN local (hardware) address (1-64), to be pinned into the PIN interface board (NGIO, NIM MODEM, or fiber optic interface board). Optionally, each NG may, in the future, have a PIN global (software) address as well. Assign the LCN node address that will be given to the NG during LCN configuration. NG Implementation and Operation 2-3 12/96