Download Network Gateway Implementation and Operation

4.2.4
4.2.4 NG Status Messages Display
Access method:
From the Main Menu
From System Status
From Gateways
From Status Detail
From View Object Detail
From the Remote LCN display
select SYSTEM STATUS
select GATEWAYS
select an NG, then
select STATUS DETAIL
select PIN COMM, then
select VIEW OBJECT DETAIL
select a Remote LCN
press the DISP FWD key
Figure 4-6 — NG Status Messages Display
This detail display provides up to 20 current network status messages resulting from
configuration or operation errors at the local LCN. Each message is specific to the problem
and is intended to be self-explanatory. Each of these messages is due to one of four types
of error:
• On-line NCF configuration error
• Mismatch of the local LCN database with remote system database values.
• An improper request (e.g., requesting "A" Cable Only when there is no "A" cable
connection).
• A cable quality change on a viable communications path.
Note that some of these errors require NG shutdown and reload as part of the recovery
procedure.
NG Implementation and Operation
4-8
12/96