Download User Manual

■Warning and Alert:
Warning
y
Do not proceed to the assembly of the line while electrifying.
y
Circuit & change components between entering shutting down the power supply and stopping
showing CHARGE LED light of the Servo driver.
y
The output of Servo drive [U, V, W] must NOT touch the AC power.
!
Alert
y
Install the fan if the temperature around is too high while the Servo driver is installed in the
Control Board.
y
Do not proceed to the Anti-Pressure-Test to the Servo driver.
y
Confirm the quick stop function is available before operate servo drive.
y
Matching up machine to change the user parameter setting before machine performs. If there is
no according correct setting number, it could lead to out of control or breakdown.
y
Before start operate this servo drive check the servo motor Cn030 setting, it will lead to error
when CN30 without setting correctly.
Safety proceeding:
Check the covering letter detail before installing, running, maintaining and examining. Furthermore, only
the profession-qualified people can proceed to the line-assembly.
Safety proceeding in the covering letter discriminate between “Warning” & ”Alert”.
Alarm
Indicating the possibility dangerous situation. It could cause the death or serious
damage if being ignored.
Indicating the possibility dangerous situation. It could cause smaller or lighter human
!
Warning
injured and damage of equipment.
Read this covering letter detail before using Servo driver.
i