Download GEN-SYS User Manual

Transcript
OWL-GEN-SYS-4-UM v1.5
24/06/08
Figure 6 - Plug power cable into socket
Finally attach the PTFE exhaust line to the split out, by finger tightening nut and then further tighten with a ¼
turn using a 7/16” spanner.
Figure 7 - Attach PTFE exhaust line to split outlet
The OVG-4 is now installed.
© 2008 Owlstone Ltd
Proprietary and Confidential
Page 12 of 20