Download Manual - Cloudfront.net

Omega 2
SUBMASTER PLAYBACK
RUNNING PLAYBACKS
PLAYBACK
Sub Pg Name
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
23
24
1 House Lights
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
Enter:
Sub Numberb u
The Playback Screen presents an overview of the system’s
Submasters. Any Submaster recorded from the Stage or Submaster
Screens will be presented on the Playback Screen with a summary
of the Submaster’s attributes.
The Playback Screen highlights the Submaster number and page
position in the first two columns. Submaster memories can be
assigned on pages one through four. Each page of memory is
independent from the next page. Submaster pages can be changed
on a one-by-one basis, or by a global command that changes all the
Submasters at once. A page number change only affects Submasters
in the zero position. Any Submaster assigned a level greater than
zero will remain on the active page until the Submaster is returned
to zero.
The Playback Screen supports an alphanumeric label for the
Submaster. Any label set in the Submaster Record Window will
appear in the name column on the Playback Screen.
The Playback Screen coordinates the Submaster Mode color (on
the screen) with the color of the LED above the Bump Button.
Submaster Modes are assigned conditions of operation. The
Submaster always operates when the slider is positioned. The Mode
affects how the Submaster responds when the Bump Button is
pressed. Submaster Modes can be one of the following:
Manual:
Submaster level is controlled by slider. Bump Button
forces the level to full or default. Mode color and
LED are green.
Grandmaster FL 9:01:00
Fdr:
1
Cue:
%: __/__S
In
Dwell
5
7
Out
3
2
3
4
/
/
/
Mode
Level
Manual
0
Manual
0
〉
〉
Screen Colors:
Manual Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Green
Timed Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Brown
Disabled . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Gray
Timed:
Submaster level is controlled manually by slider.
Bump Button starts and stops timed sequence.
Mode color and LED are amber.
Advancing: Submaster level is controlled by slider. Bump
Button starts and stops timed sequence. Loads
next page automatically when returned to zero.
Capacity controlled by Submaster Setups Screen.
Mode color and LED are amber.
Solo:
Submaster level is controlled by slider. Bump Button
forces assigned level to full, remainder dim. Mode
color and LED are red.
Disabled:
No output from Submaster. Mode color is gray.
The In, Dwell and Out Times displayed on the Playback Screen
allow the Submaster to be controlled by the times established in the
Submaster Record Window. Timed Submasters allow the sequence
to be started by the Bump Button. Any Timed Submaster can be
manually controlled by moving the slider.
Timed control of the Submaster can be started, paused or
stopped by a Bump Button press. If the timed progress is paused
by a Bump Button press, a lower case 'p' is displayed in the level
column. The timed control can be overridden at any point by the
motion of the slider. If the input from the slider level overtakes the
level of the timed control, the timer stops counting until the Bump
Button is pressed again.
The Playback Screen highlights the progress of a timed or
advancing Submaster by changing the active time from blue to
amber. This color change allows the operator to quickly observe the
progress and the status of the timed or advancing Submasters.
43