Download OP-1224 Pushbutton Panel
Transcript
44 Applying Ladder Logic Controlling LEDs Separately You can control the LEDs separately from the status of the pushbuttons. In the example below, we are using Allen-Bradley input type files (I:0/2, I:0/3 and I:0/4) to trigger the ON/OFF of LED3, LED4 and LED5. Remember: Any pushbutton configured for maintained (alternate action) will ignore the bits in these two words. Independent control of the LEDs can only be accomplished if you have Enabled LED Separation during your initial configuration. (See Page 19, Step 9.) SLC 5/03 or 5/04 Mapped Memory Location m (such as N7: 0/0-- 0/15) m+1 (such as N7: 1/0 1/15) I:0 Light LED 3 N7:4 2 I:0 2 Light LED 4 N7:4 3 I:0 3 Light LED 23 4 N7:5 6 Function 1 2 3 4 5 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 Pushbuttons 1-16 ON/OFF Pushbuttons 17-24 ON/OFF m+2 (such as N7: 2/0 2/15) LEDs 1-16 flash m+3 (such as N7: 3/0 3/15) LEDs 17-24 flash m+4 (such as N7: 4/0 4/15) LEDs 1-16 ON/OFF m+5 (such as N7: 5/0 5/15) LEDs 17-24 ON/OFF m+6 (such as N7: 6/0 6/15) Force Function Data (1-16) m+7 (such as N7: 7/0 7/15) Force Function Mode/Data (17-24) 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 m+4 0 0 0 0 0 0 0 0 0 0 0 0 1 1 0 0 Not Used 24 23 22 21 20 19 18 17 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 m+5 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 N7:4 LED number bit number LED number N7:5 bit number 6 7 8