Download Chapter 6: Matrox Pulsar hardware reference

Technical information
69
Grab information
■
Analog interface:
❐
4 software-selectable video inputs.
❐
Variable sampling rate: 5 - 45 MHz.
❐
Sub-sampling factors: 2, 4.
❐
10-bit analog-to-digital converter.
❐
45 MHz maximum sampling at 8 bits.
30 MHz maximum sampling at 10 bits.
❐
■
■
■
Low-pass filter cutoff frequency: 10 or 21 MHz software-selectable.
Digital interface:
❐
Up to 16-bit digital RS-422 data (requires optional
digital-interface companion board).
❐
Up to 30 MHz input rate.
Synchronization and control:
❐
Horizontal sync, vertical sync, pixel clock input or output
(TTL/RS-422).
❐
Pixel clock input and output (TTL/RS-422).
❐
External trigger input (TTL/RS-422).
❐
Exposure (timer) outputs (TTL/RS-422).
Video adjustment:
❐
Software-programmable input gain, offset, and references.
❐
Fully programmable 8K input LUT.