Download SVAN 979

SVAN 979 USER'S MANUAL_______________________________________________
The Keyboard Settings position enables
the user to programme the operational
mode of the <Shift>, <Alt> and
<Start/Stop> push-buttons and switch
backlight and sound options on or off. The
default settings are Direct for both items
shown on the display screen.
<ENT>
<Shift> / <Alt> push-button mode
In the Shift/Alt position the user can choose between 2nd Fun. and Direct.
When the Direct option is selected, the <Shift> and <Alt> push-buttons
operate as in the keyboard of a computer – in order to achieve the desired
result, the second push-button has to be pressed at the same time as
<Shift>/<Alt>. When the 2nd Fun. option is selected the <Shift>/<Alt>
push-button operate in sequence with the other one. This enables the user
to use only one hand to operate the instrument.
<Start/Stop> push-button working mode selection
In the Start/Stop position the user can choose between Direct and
With Shift. When the Direct option is selected the instrument reacts on
each of the <Start/Stop> push-button press, starting or stopping the
measurements.
When the With Shift option is selected the <Start/Stop> push-button
operates at the same time as or in a sequence with <Shift>. The
measurements are started or stopped after pressing both push-buttons.
Backlight mode selection
In the Backlight position the user can switch keyboard backlight on or off.
Sound mode selection
In the Push Key Sound position the user can switch keyboard sound on or
off. During the actual measurement the key sound is not active even if it was
switched on in the Keyboard Settings window.
8.8. Checking the modem status – Modem Status
The Modem Status position is active only
when the GPRS function is switched on
(path:
<Menu>
/
Instrument
/
Wireless Transfer / Network / GPRS: on). It
enables the user to check the status of the
modem.
<ENT>
8.9. Setting parameters of the I/O port - Multifunction I/O
The Multifunction I/O enables the user to
select the available functionality of the I/O
port.
Selection of the mode of I/O port
In the I/O Mode, it is possible to select the
function of the instrument’s 2 pin Lemo
<ENT>
69
_