Download HERE - Nemoto

SPECIFICATIONS:
Output signal
600 +/- 150nA/ppm Cl2
NOTE: The output signal of the NE4-CL2 sensor is of opposite polarity to other sensors of this type –
i.e. the signal is negative compared to (say) a standard CO or H2S sensor of the same type.
Zero offset in clean air
Response time (T90)
Repeatability
< +/- 0.2 ppm equivalent
(T90)
< 40 sec.
(Same day measurement)
< +/- 2%
Zero offset
< +/-0.2 ppm equivalent / year
Sensitivity to CL2
< +/- 2% signal / month
(Zero offset swing)
< +/-0.5ppm (-20°C to +50°C)
Long Term Stability
Temperature dependence
Minimum Detection Limit
0.1 ppm
In Service
-20°C to +50°C
Recommended in Storage
-0°C to +20°C
In Service
15 – 90%RH
(non-condensing)
Recommended in Storage
15 – 90%RH
(non-condensing)
Temperature range
Humidity range
Pressure range in service
0.9 – 1.1 atm
0 – 10 ppm
Detection range
Maximum Overload Range
Recommended load
resistor
10Ω
Recommended maximum
storage time
Warranty
NE4-CL2-Manual, Issue 4, Sept 2015
50 ppm
6 months
Against faulty workmanship or
materials
24 months
- page 4 of 15 -