Download 1-input User Manual

i
Request
Make sure that this instruction manual is given to the final user of the device.
Keep this manual at the work site during operation of the FP23 Series.
Preface
This Instruction Manual describes the basic functions and how to use "1-input:
1-output/2-output" FP23 Series Controllers.
For details on "2-input: 1-output/2-output" and "servo output," refer to separate
manuals.
This Instruction Manual is meant for those will be involved in the wiring, installation,
operation and routine maintenance of the FP23 Series. This manual describes the
handling, installation and wiring procedures for operation.
While using this device, you should always follow the instructions written in this
manual.
For safety precautions and potential damage to equipment and/or facilities,
additional instructions are indicated by the following headings.
Safety Precautions
Warning
The FP23 Series Digital Controller is designed for controlling temperature,
humidity and other physical quantities in general industrial facilities. It
must not be used in any way that may adversely affect the safety, health
or working conditions of those who come into contact with the effects of its
use. When used, adequate and effective safety countermeasures must be
provided at all times by the user. No warranty, express or implied, is valid
when this device is used without the proper safety countermeasures.
Warning
Before you start to use this device, install it in a control panel or the like
and avoid touching the terminals.
Do not open this device's case, and touch the boards or inside of the
case with your hands or a conductor. The user should never repair or
modify this device. Doing so might cause an accident that may result in
death or serious bodily injury from electric shock.