Download USER MANUAL AT100

USER MANUAL
AT100
Version：
1.0
1
Contents
1 Introduction………………………………………………………………………….3
1.1 Compiling intention ............................................................................................................3
2 Connection mode of external port…………………………………………………...3
2.1.
2.1.
Description of external port ..........................................................................................3
Connection mode of lock and electric bell....................................................................4
3. Keyboard explanation……………………………………………………………….5
4. Menu program………………………………………………………………………5
4.1 Enroll...................................................................................................................................6
4.2 Delete (user)........................................................................................................................6
4.3 Duress FP Set ......................................................................................................................6
4.4 Glog View ...........................................................................................................................6
4.5 Slog View............................................................................................................................7
4.6 Delete log ............................................................................................................................7
4.7 Identify Mode......................................................................................................................7
4.8 Time set...............................................................................................................................7
4.9 Language.............................................................................................................................7
4.10 Managers...........................................................................................................................7
4.11 Machine ID........................................................................................................................7
4.12 Baud 115200 .....................................................................................................................8
4.13 Password ...........................................................................................................................8
4.14 Sensor Adjust ....................................................................................................................8
4.15 Auto off .............................................................................................................................8
4.16 Sleep..................................................................................................................................8
4.17 Lock ctrl ............................................................................................................................8
4.18 Open Time.........................................................................................................................8
4.19 Re-verify ...........................................................................................................................9
4.20 Glog Wrn...........................................................................................................................9
4.21 Slog Wrn ...........................................................................................................................9
4.22 Info View...........................................................................................................................9
4.23 Self Test.............................................................................................................................9
4.24 Restore Def .....................................................................................................................10
5. Rapid operating instruction of AT100…………………………………………….10
5.1Fingerprint registration ......................................................................................................10
5.2 User deletion .....................................................................................................................10
5.3 Language alteration...........................................................................................................10
2
1 Introduction
1.1 Compiling intention
Instruction for users
2 Connection mode of external port
2.1. Description of external port
Combination mode of links:
1、 RS485 connection method—RS485A、RS485B
2、 connection mode of Wiegand—GND、DATA0、DATA1
3、 connection mode of the bell—BELL-、BELL+
4、 connection mode of OUT switch—BUTON、GND
5、 connection mode of door contact—DOORSENSOR、GND
6、 alarm connection mode—ALARM+、ALARM7、 connection line of the lock—LK-COM、LK-NO、LK-NC
3
2.1. Connection mode of lock and electric bell
1、connection mode of normally electrified closed lock
Power supply
+
adapter
12V
+
LOCK
-
2、connection mode of normally electrified opened lock
Power supply
+
adapter
12V
+
LOCK
-
4
3. Keyboard explanation
AC 100 has five key-presses except power supply key-press, and the central key-press is the
doorbell key-press. Moreover, the corresponding relationship between other key-presses is:
ESC
OK
Basic operation: OK may enter into the menu, ESC may back, ，
may change values, there
to choose specific menu.
are 24 menu options in the system, use ，
4. Menu program
The first level menu
Enroll
The second level menu
fingerprint of user
card of user
management fingerprint
management card
Delete (user)
Duress FP Set
Glog View
Slog View
Delete log
Identify Mode
Time set
Language
Managers
Machine ID
Baud 115200
password
Sensor Adjust
Auto off
Sleep
Menu T. out
Lock ctrl
Open Time
Door Sensor
Re-verify no.
Glog Wrn
Slog Wrn
Info View
5
Self Test
Restore Def
4.1 Enroll
Users in system are divided into two parts: administrators and the general users. After register
administrator user in the system, start menu by pressing the OK button, then it requires a
validation process to enter. Ordinary users are unable to open the menu through identification
unless the system has not yet registered administrator. Therefore, for the sake of the security
system, when user adds the first user, it should be registered as an administrator, and proposes
manager should register at least two fingerprints.
D User fingerprints: First of all, enter the ID number, user press fingerprint 3 times to
complete the registration according to the interface prompts. The registered users are ordinary
users.
D User card: First of all, enter the ID number, and then brush on a card to complete
registration. The registered users are ordinary users.
D Administrator fingerprint: Firstly, enter the ID number, user press fingerprint 3 times to
complete the registration according to the interface prompts. The registered users are
administrators.
D Administrator card: First of all, enter the ID number, and then brush on a card to
complete registration according to tips. The registered users are administrators.
4.2 Delete (user)
Firstly, enter the ID number, use
key， key to switch values, then press OK to confirm
and delete user
Administrator may delete other administrators.
4.3 Duress FP Set
Press fingerprint according to tips may set this fingerprint as the duress fingerprint, only the
registered fingerprint can be set to the duress fingerprint.
4.4 Glog View
Firstly, enter the ID number, use key, key to switch values, and then OK to determine
that the user shall have how much numbers of attendance records, and then press OK will show
key. Each record show the contents
the attendance records one by one, check it by use key,
including number, ID, attendance type, time.
Enter the ID number is 0, means check sum of all user attendance records.
Enter other registered users ID to check with the total number of attendance records
6
4.5 Slog View
Firstly, enter the ID number, use key, key to switch values, and then OK to determine
that the user shall have how much numbers of management records, and then press OK will show
management records one by one
Only inputting the registered administrator is valid
4.6 Delete log
There is a tip before delete records, choose OK to delete all records, including attendance
records and management records.
4.7 Identify Mode
Currently supports two modes: fingerprint | cards and fingerprint + card, fingerprint | card is
fingerprint or cards mode can open the door through any kind of certification. And fingerprint +
card shall require to be certified in two ways at the same time to open the door.
4.8 Time set
After entering the setting interface, there are six input focuses, namely year, month, day, hour,
key to change values,
minute, second. May press OK to switch these six focuses, use key,
switching the last focus to return to the main menu.
4.9 Language
Supports Simplified Chinese, Traditional Chinese and English. System default is Simplified
Chinese.
4.10 Managers
May set the maximum number of administrators, the default parameter is 5, maximum is 10.
Minimum is 1.
4.11 Machine ID
Machines No. is used for identifying an attendance machine, the value of 0 ~ 255. This
identification generally used to distinct among attendance machines when unite network, it also
require to use this parameter during a time when connect communication. If it is a independent
machine, this number can be set up randomly.
7
4.12 Baud 115200
When user uses the interface of RS232 to communicate, Baud rate is the velocity of
communication interface. This rate can be configured to 5 kinds: 115200, 57600, 38400, 19200,
9600, the default setting is 115200bps
4.13 Password
The setting is used for password of upper computer communication, the password for the
six-digit.
4.14 Sensor Adjust
This command is used to adjust the parameters of Identification. It requires to cover all
collecting windows of fingerprint head before correct, then you can complete the rectification
work by using this menu.
4.15 Auto off
Set time of automatic shutdown, the value is 0 ~ 255 minutes. When the time arrives, shut
down automatically. The time set to 0 means to turn off the automatic power off function.
4.16 Sleep
Set automatic sleep time, the value is 0 ~ 255 minutes.
When the time arrives, shut down automatically. The time set to 0 means to turn off the
automatic sleep function.
Press any key to wake up equipment under sleep state.
Dormancy: Set 1 minute. Automatic power off: set 2 minutes. The equipment comes into the
dormant state and can not automatically shutdown.
4.17 Lock ctrl
This parameter set time length of opening the door by electric lock, the value range is 0 ~ 16s.
Parameter is 0 means to close lock control output.
4.18 Open Time
This parameter set when to inspect door contact, the parameter range from 0~255s
8
4.19 Re-verify
use the parameter to set time of repeated confirmation, the parameters of the range of 0 ~ 255
minutes, there was only one incident will be recorded if open the door twice in this time.
4.20 Glog Wrn
When residual capacity of the attendance records is less than the parameter setting, the
system will send warning signals to prompt the user that it requires to remove part of the attend.
4.21 Slog Wrn
When the capacity of the management of records is less than the parameter setting, the
system will send warning signals to prompt the user that it requires to remove part of the
management records. This parameter value is 0 ~ 255, the default parameter is 100.
4.22 Info View
D
D
D
D
D
D
D
D
D
D
In this menu the user can query the following 10 system information
user registration
management registration
fingerprint registration
duress fingerprint
ID card registration
attendance records
Management Records
manufacturers
version of fingerprint algorithm
firmware version
4.23 Self Test
D
D
D
D
D
D
D
D
In this menu, the user can self-inspect hardware functions of the system, inspect a total of 10
keyboard
buzzer
fingerprint identification
Flash
RS485_Tx
RS485_Rx
unlocking relay
alarming relay
9
D
D
Wiegand output
Wiegand input
4.24 Restore Def
You can restore your system to the parameters state of factory settings of by using this menu.
Owing to use the menu shall lead to datum loss, so be very careful to use! ! !
Restoring the factory settings means to restore device configuration, the registered users still
exists.
5. Rapid operating instruction of AT100
5.1 Fingerprint registration
1. Press OK to enter into the main menu (require administrator to verify if you set)
2. Press OK to enter Enroll menu to enter the menu
3. Press OK to enter User FP menu
4. Prompts to press fingerprints 3 times, after succeed, Exit from ESC
5. And then press ESC again until back to the main interface, or wait for a few
seconds to return to the main interface with no operation
5.2 User deletion
1. Press OK to enter into the main menu (require administrator to verify if you set)
arrow to select Delete menu
2. Press
keys to select a
3. Press OK to enter the ID selection interface, using key,
specific ID
4. Press OK to delete, then prompts and press OK to delete
5.3 Language alteration
1. Press OK to enter into the main menu (require administrator to verify if you set)
2. Press until language of the ninth menu appears
3. Press OK to enter the amendment state, at this time, you can use key, key to
switch values
4. Press OK–back from the modified state, press ESC-back from the menu1.
10