Download OK - LinearX Systems Inc

Transcript
Chapter 7
Utilities Menu
Also, if you have other cards in your computer which use interrupts (IRQ's),
these should not be selected at the same IRQ as the COM port. Network cards,
sound cards, etc. may all use IRQ's as well, and if you choose the same IRQ for
more than one device, a conflict will result causing corrupted communication.
You may need to determine first where the com port IRQ in your computer is
currently set by inspecting the jumpers on the motherboard or I/O card. If you
have other cards installed as well, you may need to do the same for them. It
is very important that no IRQ conflicts exist with the COM port!
When you have made your selections, press the OK button. If you have made
changes, Windows will ask you if you wish to restart at this time. Restarting
Windows is necessary before the changes will take effect.
UART Chips and your Computer Speed
The PAC interface is designed to operate at high baud rates. Because of this,
it is possible for overrun errors to occur depending on the speed of your
computer, and the type of UART (Universal Asynchronous Receiver Transmitter) chip contained in your serial port hardware. There are two types of UART
chips: the 16450(8250), and the 16550. The 16450 type part is older, and only
has a 2 byte buffer. The 16550 is newer and has a 16 byte buffer. If your
computer cannot read the bytes coming in from the PAC before the UART
buffer fills up, then an overrun error occurs. With the 16550 UART, the larger
16 byte buffer allows more time for the CPU in the computer to read the bytes
before an overrun occurs. With the older 16450 UART, the CPU must keep up
with the serial port data speed or an overrun error will occur almost immediately.
Whether or not an overrun error occurs depends on a lot of different
factors. One of the primary factors is your computer's CPU speed.
A computer with a 386 CPU will overrun much easier than a 486 or
a Pentium. Also, the speed of other elements in your system (such
as the video card) can also play a major roll in how much time your
CPU must spend on other duties. Be aware of these factors, and if
you wish to check which kind of UART is installed in your serial port,
the PAC interface dialog will display them when you first open it.
pcRTA - User Manual
209