Download - Power Logic

Transcript
ION Enterprise Optimizations
ION Enterprise Administrator’s Guide
ION Enterprise Optimizations
Increasing Log Retrieval Capacity
The Log Inserter retrieves records from the device using one-shot programs. In a
system with a heavy logging burden, the following changes can be made to favour
record retrieval by the Log Inserter.
1.
In the Management Console, set the Update Period for each device from 500
ms (default) to 10000 ms. This setting specifies the frequency at which data
collected by polled program is retrieved from the device.
2.
Create a DWORD registry value called OneshotRatio under the
HKEY_LOCAL_MACHINE\SOFTWARE\Power Measurement\ION
Enterprise\5.0 key.
3.
Set the OneshotRatio value to 20. This value defines the number of one-shot
programs that are processed for each polled program. If the OneshotRatio value
does not exist, the default value is 4.
This is of particular use during first-time system startup, when a possibly large
backlog of records must be retrieved.
Improving System Performance By Changing Siteserver Thread Pool Size
For a system consisting of many simultaneously-connected sites, communications
performance is poor. Updates in Vista may be infrequent when the Log Server is
running.
The siteserv process uses two pools of threads to service the sites defined in an ION
Enterprise network, one pool for connected sites and one pool for disconnected
sites. The thread pool for connected sites has a default maximum size of sixteen. In
a site with a large number of continuously connect sites, system performance can
be improved by increasing this thread pool size.
To change the size of the thread pool available to connected sites:
1.
Under the HKEY_LOCAL_MACHINE\Software\Power Measurement\ION
Enterprise\5.0 registry key, create a new Registry DWORD value called
ConnectedThreadPoolSize.
2.
Assign a value of 50 (decimal) to the key.
The system does not have to be restarted to detect this change. The new value will
be detected automatically.
How To Start Log Inserter In Mode Where Only New Records Are Uploaded
If a new system (or new database) is started and no pre-existing data from the
meters is required, use the -q 'quick start' Log Inserter command line argument.
When started with -q as an argument, the Log Inserter will upload records with a
timestamp greater than NOW.
This can make the startup process complete much more quickly if meters have
already stored many records.
Page 174
Chapter 8 - Tips, Troubleshooting, FAQs