Download - Power Logic
Transcript
ION Enterprise Optimizations ION Enterprise Administrator’s Guide ION Enterprise Optimizations Increasing Log Retrieval Capacity The Log Inserter retrieves records from the device using one-shot programs. In a system with a heavy logging burden, the following changes can be made to favour record retrieval by the Log Inserter. 1. In the Management Console, set the Update Period for each device from 500 ms (default) to 10000 ms. This setting specifies the frequency at which data collected by polled program is retrieved from the device. 2. Create a DWORD registry value called OneshotRatio under the HKEY_LOCAL_MACHINE\SOFTWARE\Power Measurement\ION Enterprise\5.0 key. 3. Set the OneshotRatio value to 20. This value defines the number of one-shot programs that are processed for each polled program. If the OneshotRatio value does not exist, the default value is 4. This is of particular use during first-time system startup, when a possibly large backlog of records must be retrieved. Improving System Performance By Changing Siteserver Thread Pool Size For a system consisting of many simultaneously-connected sites, communications performance is poor. Updates in Vista may be infrequent when the Log Server is running. The siteserv process uses two pools of threads to service the sites defined in an ION Enterprise network, one pool for connected sites and one pool for disconnected sites. The thread pool for connected sites has a default maximum size of sixteen. In a site with a large number of continuously connect sites, system performance can be improved by increasing this thread pool size. To change the size of the thread pool available to connected sites: 1. Under the HKEY_LOCAL_MACHINE\Software\Power Measurement\ION Enterprise\5.0 registry key, create a new Registry DWORD value called ConnectedThreadPoolSize. 2. Assign a value of 50 (decimal) to the key. The system does not have to be restarted to detect this change. The new value will be detected automatically. How To Start Log Inserter In Mode Where Only New Records Are Uploaded If a new system (or new database) is started and no pre-existing data from the meters is required, use the -q 'quick start' Log Inserter command line argument. When started with -q as an argument, the Log Inserter will upload records with a timestamp greater than NOW. This can make the startup process complete much more quickly if meters have already stored many records. Page 174 Chapter 8 - Tips, Troubleshooting, FAQs