Download caution

Yamatake Corporation
Installation
To install a flanged detector on a PVC pipe using SUS grounding ring material
and a protective plate:
Use this method to install the detector using a protective plate to prevent the PVC pipe
from being deformed or damaged when the bolts are tightened with the specified
torque.
•
Install the protective plate between the outer side of the PVC flange and the
detector, as shown in the figure below. The protective plate protects the PVC pipe.
The torque level for tightening the bolts is not related to the gasket material.
See Table 2-6 on page 2-28 for the appropriate torque.
See Table 2-7 on page 2-33 for the inner diameter of the gasket.
Protective plate
Gasket
Lining
Grounding ring
Figure 2-35 Installation on a PVC pipe using SUS grounding ring material and a
protective plate
Model MGG18 - MagneW 3000 PLUS Smart Electromagnetic Flowmeter Detector
2-39