Download USER MANUAL

NOTE
The ShockMaster 500 meets the requirements of the applicable
electromagnetic compatibility (EMC) standards EN 60602-1-2.
These limits are designed to provide reasonable protection against harmful interference
in a typical medical installation. The equipment generates, uses and can radiate radio
frequency energy. If not installed and used in accordance with these instructions, the equipment may cause harmful interference to other devices in the vicinity. However, there
is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference with other devices, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
!
Reorient or relocate the receiving device
Increase the separation between the equipment
Connect the equipment into an outlet on a circuit different from that to hich
the other device is connected
Consult the manufacturer of field service technician for help
3.2 Operation
The ShockMaster 500 is operated by using a color LCD monitor with touch-screen function.
3.2.1 The user interface
3.2.1.1Introduction
The user interface is divided into 1 main-screen ( treatment-screen) and 5 menu-screens.
When switching on the device, you automatically enter the main screen (treatment screen)..
You can use the 5 control buttons at the bottom of the screen to display a menu. The selected control
button will turn blue and the requested menu is activated. To leave the menu, push the control button again.
21