Download Brand Mobiliser User Manual

2.10.7.2 SMPP Outbound Channel
The SMPP outbound connection is active for all clients that have explicitly configured to use the connection. Use
the pencil image to edit the different parameters. After saving the changes, a system restart using the “Restart”
button must occur before changes take effect.
The following are the allowable parameters for each SMPP outbound connection.
Parameter
Description
Name
Unique name to allow system to refer to this channel.
Url
Host name of the SMSC.
Port
Port number to create connection to.
User
User name to authenticate with.
Password
Password to authenticate with.
System Type
Identifier for SMSC.
Dest Ton
Destination Type of Number
Dest Npi
Destination Numbering Plan Identification
Src Ton
Source Type of Number
Src Npi
Source Numbering Plan Identification
Delay(ms)
Message delay before sending next message.
Permanent
Whether connection is persistent or a new connection is made for every message.
Active
Whether this channel is active or not.
Please consult with your SMSC partner to configure the Src/Dest Ton/Npi values.
Brand Mobiliser User Manual
Version 1.0 - December 2010
41