Download User`s Manual
Transcript
Names of the Parts Rear DC input connector Connect this with the DC plug end of the AC power adapter. (See Page E-13.) (Only connect the supplied AC power adapter; nothing else.) P R IN T E R P C Personal computer (PC) dedicated USB port (Type B) Connect this with the USB port (type A) of the PC. Use this when reading is started from the PC side and image data is transferred directly to the PC, or when setting the operating environment of the Captureboard from the PC side. First, install the drivers and software contained on the supplied CD-ROM. See the separate volume Captureboard Software Operation Manual. Printer connector (USB port Type A) Connect this with the USB connector of the printer (See Page E-31). (The printer connector is dedicated for use with a printer; use it only with a printer.) * Used only when a printer has been purchased as an optional item The connector is located on the bottom surface of the main unit. The diagram view is seen from the bottom. Locking and unlocking the casters of the stand Lock the casters with the stopper after setup. To move the unit, remove the stabilizers and release the caster stopper. Press the bottom of the stopper to lock it. Press the top to release it. Unlock Lock Stabilizer Caster E-10 C-11_man_E.indd E-10 07.7.30 6:04:51 PM