Download GE SECURITY EMEA BVBA

DET NORSKE VERITAS
Report No: 2005-3246, rev. 01
TECHNICAL REPORT
Table of Content
Page
1
SCOPE OF WORK ...................................................................................................... 1
2
TEST LABORATORY................................................................................................ 1
3
TEST PERIOD............................................................................................................. 2
4
ATTENDING REPRESENTATIVES......................................................................... 2
5
5.1
5.2
5.3
EQUIPMENT UNDER TEST ..................................................................................... 3
Equipment submitted for tests
3
Inputs/outputs tested
12
Modifications
13
6
6.1
6.2
6.3
EVALUATION OF PERFORMANCE DURING THE TESTS ............................... 14
Performance monitoring
14
Functional testing
14
Acceptance criteria
14
7
FUNCTIONAL TESTING ........................................................................................ 15
8
8.1
8.2
8.3
8.4
CABINET PROTECTIVE TESTS - EN 50131-6 ..................................................... 54
Impact/tamper protection
54
Opening of the enclosure / tamper detection
55
Removal from mounting surface / tamper detection
56
Penetration of cabinet / tamper detection
56
9
9.1
9.2
9.3
9.4
9.5
CABINET PROTECTIVE TESTS – CLC/TS 50131-3 ............................................ 56
Tamper protection (normal access)
56
Tamper protection (impact)
57
Tamper detection (opening by normal means)
58
Tamper detection (removal from mounting)
59
Tamper detection (penetration of cabinet)
59
10
10.1
10.1.1
10.1.2
10.1.3
10.1.4
10.2
IMMUNITY TESTING ............................................................................................. 60
Climatic tests
60
Cold (operational)
60
Dry heat (operational)
61
Damp heat, steady state (endurance)
62
Damp heat, cyclic (operational)
63
Mechanical tests
64
Page i
Reference to part of this report which may lead to misinterpretation is not permissible.
2005-3246 final.doc