Download 5 Carbon Emission Model Development

Transcript
CRANFIELD UNIVERSITY
SCHOOL OF APPLIED SCIENCES
MSc by Research Thesis
Academic Year 2011 - 2012
JIANING GUO
Feature Based Cost and Carbon Emission Modelling for Wire and
Arc Additive Manufacturing
Supervisors: Dr. Jörn Mehnen and Dr. Yuchun Xu
December 2012
This thesis is submitted in partial fulfilment of the requirements for
the degree of Master of Science
© Cranfield University 2012. All rights reserved. No part of this
publication may be reproduced without the written permission of the
copyright owner