Download 5 Carbon Emission Model Development
Transcript
In the design for WAAM phase, component is designed by CAD software, and then the temperature and stress properties during welding deposition will be analyzed by finite element method (FEM), the most appropriate welding tool paths will be identified and this helps to minimizing distortions of the WAAM products (Mehnen, Ding, Lockett, Kazanas, 2010). A robot path generation program RUAMROB© was developed for the WAAM project. This soft ware tool consists of two main modules: a slicing module and a robot program generation module. From Ding et al., (2010), “By executing these two modules automatically, the program can slice the designed ALM parts and generate the ready-to-use path code for a Fanuc robot in one go. A user-friendly interface for RUAMROB© has also been developed to simplify the setting of parameters”. In the actual deposition Process, the welding tracks are executed by a robotic system. A robot arm guides the welding torch along the optimized tool path. The specific welding techniques for depositing may vary depending on material and features of components (Williams, undated). The integrated process aims to combine ALM and traditional machining such as grinding, milling and rolling into one machine to form continuous process. This integrated process helps to obtain final precise net shape with low cost and high efficiency (Mehnen et al., 2010) (Kashoob, 2011). 2.2.2 Materials and features After more than ten years development, the WAAM technique has made a significant progress (Williams, undated). Modern welding and automation technologies provide opportunities that were not available in the past. Now WAAM can be used to deposit a variety of materials and features of real world workpieces that can be welded, such as steel, Ni alloys, and even highly reactive metallic e.g. Ti alloys in an out-of-chamber environment (Ding, et al., 2011). The welding technique adopted by WAAM depends on the specific material and geometry feature to be manufactured. Standard wire based welding processes such as Gas Metal Arc Welding (GMAW) and Gas Tungsten Arc Welding (GTAW) are widely adopted as heat sources due to their low cost, high deposition rate and widespread Suitability for various kinds of metals as well 10