Download English - Fiery Help documents

PRINTING
THROUGH A VIRTUAL PRINTER
212
7 Set the virtual printer as the default printer (optional).
8 Print a test page to check that the virtual printer is working properly (optional).
The test page appears in the job list of Fiery XF.
9 Click Finish.
You can now print to the virtual printer from your graphics program.
Be aware of the following:
Windows creates just one driver for either a 64-bit or for a 32-bit operating system. If the
Fiery XF server and the graphics program are installed on computers that are running
Windows in different modes, additional steps are necessary.
TO SET UP A FIERY XF VIRTUAL PRINTER ON A MIXTURE OF WINDOWS 64-BIT AND WINDOWS 32-BIT OPERATING
SYSTEM
After you have set up a connection to the remote virtual printer, you need to perform the
following additional steps if the Fiery XF server and the graphics program are installed on
computers that are running Windows in different modes — for example, if the Fiery XF
server is installed on a Windows 64-bit operating system, and the graphics program is
installed on a Windows 32-bit operating system.
1 Do the following:
• On the computer with the Fiery XF server:
– Click Start, point to Devices and Printers, right-click the virtual printer and click
Printer properties. On the Advanced tab, make a note of the driver name. The default
driver name is “EFI XF Fiery XF Printer”. Click OK.
– Copy the appropriate PPD folder from the Tools folder to the desktop of the computer
that is running the graphics program.