1
Download English - Fiery Help documents
Transcript
434 • Apply glue area to overlapping only By default, the glue area is added on to the overlap margin. By clearing the check box, you can apply a glue area to tiles that do not have an overlap margin. In this case, the glue area simply provides an additional blank border around each printed tile. The border can help to protect the edges of tiles that are printed on delicate media from damage, which would otherwise make reprinting necessary. • Rotate every second tile by 180° Inconsistencies in color density can occur when using grande-format printers with UV ink. This feature can lessen the effect of color deviances in large areas of single color (for example, blue sky). Rotating every other file by 180 degrees can help to create an invisible seam when piecing tiles together. • Overlapping marks Overlapping marks are a visible aid to help you to align overlapping tiles accurately after printing. You can specify the length, the thickness and the color of overlapping marks. Standard marks are printed at each end of the overlap area. The dashed line is printed along the length of the overlap area. A dashed line is recommended for large overlap areas, which would otherwise be difficult to align using standard marks that are too far apart. • Tile footer You can create overlapping margins in which to print tile numbers, file name, printer name, printer resolution, custom text, and tile marks. Tile numbers help you to piece the tiles together in the right order, and tile marks help with alignment. Use the boxes to define: – The length and thickness of marks – The distance between tile marks and tile The tile footer is visible only in the printout. You cannot see it in the preview. Tile footer and glue area overlap if both are defined. • Create nesting from tiles You may be able to reduce media consumption by printing tiles collectively as a nesting and by allowing tiles to be rotated. You can define a horizontal and vertical distance between tiles. • Apply Click Apply to update the preview with your changes.
