Download 1. - DynaSCAPE

Working With Raster Images
Raster Image Names
Design names raster images according their file name with the exception of images downloaded from DynaSCAPE.com. These images are named according to the common name as it appears on the Online Plant Database. Refer to the section later in this chapter for details on editing raster image names.
Inserting Raster Images
When using the tools in this chapter, you will be prompted to Select the Bounding Area of the Raster. To place a raster image at this point, select the upper left corner, then the lower right corner, where you wish the image to be placed.
Tip
If you wish for the image to be a particular width and height at a specific point in your drawing, the easiest way to do this is to use the rectangle tool in the draw toolbox to draw a boundary. Then when choosing the boundaries for the raster, hold [Shift] to turn on the inference, and select the opposite vertices of the rectangle.
Raster Image Files and DS|Design Drawings
When a raster image is placed in a Design drawing, the raster image file is NOT saved inside the Design drawing file. Only the location of the image file on the user’s computer is saved.
If you need to transfer the Design drawing to another computer, the raster images must be transferred as well. In addition, the raster images must be placed in the exact same file location on the new computer. Otherwise the raster images will not be displayed when the drawing is opened at the new location.
13.3