1
Download 1. - DynaSCAPE
Transcript
Working with Library Figures 4. The library you selected will appear in the Library Manager panel and all its figures will be displayed. At this point you can re‐arrange the order or delete any of any figures in that library. Now you need to set the correct override layer for that library as explained in the following steps. Setting the Library Layer Override Important Note for Override Layers Setting the Library Layer Override is important as it controls which layer your library figures get put in when it is inserted into a drawing. Keeping figures on their appropriate layers is essential when using Modes to turn specific layers on and off while performing different tasks and when creating Dimension, Lighting or Irrigation plans from your drawing. You can set different override layers for each library. You cannot set individual override layers for each figure. Follow these steps to set the Library Layer Override: 5. In the Library Manager panel, select the More button to drop down an extension to the panel. 11.29
