Download ISP-CPE510G/A Manual

4. Static IP Routing
Static routing is the manual method used to set up routing. An
administrator enters routes into the router using configuration commands.
This method has the advantage of being predictable and simple to set up. It
is useful in managing small networks but becomes somewhat unwieldy on
larger networks. NETKROM NMS provides management tools for
manipulating any of the routing tables and configuring rules.
To configure Static IP Routing, select the Static Routing tab, located
under the Advanced Configuration of Node, Configuration, Network
tabs. In the Static Routing tab you can select the Routes tab or the Rules
tab.
See Page 35 for a diagram showing Advanced Configuration tabs and sub-tabs.
In the Routes tab you can:

Add, delete and select routing tables

Add, delete, modify and prioritize routes
In the Rules tab you can:

Add, delete and select rules
Figure 27.
Routing Table Handling
The bar across the top of the Static Routing tab contains the following
options:
Page 47 of 141
NETKROM OS and NETKROM
NMS User Manual