Download Contents - Alcatel-Lucent Documentation Center

Service provisioning
Service provisioning (telephony)
Service Details
(Parameters)
Description
Subscriber Data This option menu can be used to specify the subscriber data
Rate
rate, in kbps, for the subscriber interface.
Possible values:
OCU1: 24, 48, 96, 192;
OCU2: 384, 560;
OCU3: 640.
Default: 192 for OCU1, 560 for OCU2, 640 for OCU3.
Error Correction
6.2.4.21
This option menu can be used to select the error correction
technique for the DS0 path. The MVEC option is applicable
only for subscriber data rates of 19.2 kbps and less. SCEC
requires two DS0 time slots.
Possible values:
OCU1: {NONE, MVEC}. Default: NONE
OCU2, OCU3: {NONE, SCEC}. Default: NONE.
SW56 Service Details window
Overview
The SW56 (Switched 56 kbps DDS service) is also applicable to the SPQ452 dual
OCU dataport including enhanced service options to the DDS.
Figure 6-29
Logical DS0 window (SW56)
Service Details
(Parameters)
Description
Enhanced
Switch
When the enhanced switched 56-kbps check mark is set, the
channel unit supports the transmission of call progress tones
to the customer premises equipment (CPE).
Possible values: Set, Not set. Default: Not set.
AB Signaling
The AB signaling parameter check mark is normally not set,
which causes the channel unit to operate in the software signaling mode.
Possible values: Set, Not set. Default: Not set.
AEM R1.7
6-58
Version 1.00
(06.00)
363-211-454