1
Download Contents - Alcatel-Lucent Documentation Center
Transcript
6.1 6 6 Service provisioning Introduction This chapter describes the service provisioning possibilities of the AnyMedia® Element Manager - 24 Channel (AEM) R1.7. It addresses the following topics: 6.2 ■ Screen navigation ■ Service provisioning (telephony) ■ Service provisioning (data). Service provisioning (telephony) Overview Service provisioning (deactivation) means the setting of those parameters needed to provide service to (or disconnect service from) an individual end customer. For distribution ports, such parameters include those that specify a T0 cross-connection between a logical DS0 on a VRT/VB (virtual remote terminal / virtual bank) and an end-customer’s physical port, and the parameters which can be set on the port. Service provisioning is typically initiated by a service order, although unprovisioning is sometimes also needed for maintenance purposes or for re-configuration of an existing network, e.g., load balancing. Supported VRTs/VBs Figure 6-1, page 6-2 shows a conceptual diagram of the cross-connections between the physical (DS1 and subscriber) ports of the AnyMedia Access System and the VRTs/VBs. The AnyMedia Access System supports ■ up to one TR-303 VRT ■ up to 20 TR-08 VRTs ■ and up to 20 INA VBs AEM R1.7 363-211-454 Version 1.00 (06.00) 6-1
