Download Contents - Alcatel-Lucent Documentation Center

Configuration parameters
Overview
Name
Description
TZ_ID
The syntax necessary to define a TZ_ID is
the following: GMT[+|-]hh[[:]mm].
For example, you might specify
GMT+14:00 as a custom time zone ID. The
time zone that is returned when you specify
a custom time zone ID does not include
daylight savings time, then it is necessary
to use the rest of variables to set the daylight saving time for this time zone.
User view settings
TZ_startMonth
The daylight savings starting month. Month
is 0-based. e.g., 0 for January.
TZ_startDay
The daylight savings starting day-of-month.
TZ_startDayOfWeek
The daylight savings starting day-of-weekin-month. Day of week are 1-based: 1 is
SUNDAY, 2 is MONDAY and so on.
TZ_startTime
The daylight savings starting time in local
wall time, which is standard time in this
case.
TZ_endMonth
The daylight savings ending month. Month
is 0-based. e.g., 0 for January.
TZ_endDay
The daylight savings ending day-of-month.
TZ_endDayOfWeek
The daylight savings starting day-of-weekin-month. Day of week are 1-based: 1 is
SUNDAY, 2 is MONDAY and so on.
TZ_endTime
The daylight savings ending time in local
wall time, which is daylight time in this
case.
USERVIEW
Default view in User Administration and
Profiling application.
Possible values: users, user groups, domains or objects.
Default value: users.
Alarm viewer settings
ALM_VIEW
Default view of the Alarm Viewer.
Range of values: 1 to 5.
Default value: 3.
ALM_FILTER
Default alarm filter of the Alarm Viewer.
Possible values: 0:Last 24 hours, 1:Critical
raised alarms, 2:Raised alarms, 3:Alarm
from a Host/s, 4:Critical alarms not cleared,
5:Owned acknowledge alarms, 6:All acknowledge alarms, 7:None filter/all alarms.
Default value: 3.
AEM R1.7
B-8
Version 1.00
(06.00)
363-211-454