Download Servicing the Print Module

21
06/04 Rev. 3.00-02
SERVICE MANUAL
TTK
Servicing the Print Module
Contact axle
The contact pressure rollers (2) of the contact
axle (1) provide the necessary friction
between the brake roller and the material.
Remove the brake unit for service work and to
access the contact axle.
2
1
2
Tool
3
– Clamp ring pliers
Disassembly/assembly
1. Remove the front and rear hoods.
P Instructions for removing the housing
parts can be found in the section
"Housing" in the chapter "Service /
General Information".
2. Dismantle the brake unit.
P See the section "Dismantling the brake
unit" for instructions.
3. Remove the grip ring (3).
4. Thread the contact axle out of the side
guidings (4).
4