Download PDP-503CMX
Transcript
Integrator Mode Setting INVERSE MODE (negative-positive inversion) This function is for negative-positive inversion of displayed images. It is an emergency measure for handling screen burn-in occurring when still images are displayed (although it cannot completely eliminate it). Factory preset : OFF 1 Enter integrator mode. Screen 1 I NTEGRATOR MENU (See 5.4.1, “About the integrator mode.”) PICTURE The set ID will be displayed on the upper right where the “– –“ mark is. ] WHITE BAL SCREEN OS D BAU D RA T E O F F T I ME R F U L L MA S K S I D E MA S K MA S K C O N T R O L O R B I T E R MO D E I N V E R S E MO D E C O L O R MO D E –– SET UP I NPUT 1 OPTION : ON : 4 8 0 0BPS : OF F / 1 / 0. 0 / W : OF F : 128 / 128 / 128 : ON : OF F : OF F : MO D E 1 Select OPTION. SELECT CHANGE MENU EXIT Screen 2 2 Move the cursor to INVERSE MODE and use the SET button I NTEGRATOR MENU to change the setting. Each time the SET button is pressed, the setting will change between OFF and ON. SET PICTURE ] WHITE BAL SCREEN OS D BAU D RA T E O F F T I ME R F U L L MA S K S I D E MA S K MA S K C O N T R O L O R B I T E R MO D E I N V E R S E MO D E C O L O R MO D E –– I NPUT 1 SET UP OPTION : ON : 3 8 4 0 0 BP S : OF F / 1 2 / 0. 5 / W : OF F : 128 / 128 / 128 : ON : OF F : OF F : MO D E 1 INVERSE MODE applies to all inputs (INPUT1~5). SELECT SET CHANGE MENU EXIT 85