1
Download R&S®ESPI Operating Manual
Transcript
R&S ESPI Instrument Functions Basic Settings Remote command: 4.7.3.9 NOISE SRC (ON OFF) External Noise Source The NOISE SRC (ON OFF) softkey switches on or off the supply voltage for an external noise source which is connected to the NOISE SOURCE connector on the rear panel of the instrument. Remote command: OPEN START MENU 4.7.4 4.7.4.1 SYST:APPL:SREC ON DIAG:SERV:NSO ON The OPEN START MENU softkey opens the windows XP start menu and therefore provides an easy access to standard windows functions if a mouse is connect. Saving and Recalling Data Sets – FILE Key Overview The FILE key calls the following functions: • Storage/loading functions for storing (SAVE) instrument settings such as instrument configurations (measurement/display settings, etc.) and measurement results from working memory to permanent storage media, or to load (RECALL) stored data into working memory. • Functions for management of storage media (FILE MANAGER). Included are among others functions for listing files, formatting storage media, copying, and deleting/renaming files. The R&S ESPI is capable of internally storing complete instrument settings with instrument configurations and measurement data in the form of data sets. The respective data are stored on the internal hard disk or, if selected, on a memory stick or on a floppy. The hard disk and floppy disk drives have the following names: floppy disk A:, hard disk D: (hard disk C: is reserved for instrument software) FILE SAVE | RECALL! SAVE FILE RECALL FILE SELECT PATH SELECT FILE EDIT FILE NAME EDIT COMMENT SELECT ITEMS! SELECT ITEMS ENABLE ALL ITEMS DISABLE ALL ITEMS DELETE FILE NEW FOLDER STARTUP RECALL FILE MANAGER ! 4.260 EDIT PATH Operating Manual 1164.6607.12 - 02
