Download Di850

Di850
Solution ID
Controller - no or slow print, scan failure, garbled data, lockup
TAUS0703272EN*
Solution Usage
Description
Unable to print with the three-hole punch option selected. All print jobs punch with two holes.
Solution
CAUSE: Three-hole punch is not selected in memory switches.
SOLUTION: Perform the following procedure to enable three-hole punching:
1. Press the HELP key.
2. Press Key Operator Mode.
3. Press the down arrow and select #13 Memory Switches.
4. Scroll to memory switch #46.
5. Press Change to select 2 or 4 hole punch.
SPECIAL NOTE : Solution contribution by Mark D'Attilio, Production Print/SSD
Copyright 2009, Konica Minolta Business Solutions U.S.A., Inc.
June 2009
3