Download INSTALLATION INSTRUCTIONS

6.
With the front wheels pointing straight ahead unplug
the vehicle 20-pin connector from the cable reel, and
loosen the steering wheel bolt.
STEERING WHEEL
PULLER
9.
Remove the body cover.
STEERING
WHEEL
STEERING WHEEL BOLT
(Loosen.)
STEERING
WHEEL
PULLER
BOLT
2 RETAINING
TABS
VEHICLE
20-PIN
CONNECTOR
BODY COVER
2 SELFTAPPING
SCREWS
CABLE
REEL
2 PINS
CLIP
QC02805AB
STEERING
WHEEL BOLT
(Do not reuse
7.
8.
10. Remove the left and right paddle shifters from the
steering wheel.
STEERING
WHEEL
QC02804AB
4 SCREWS
Using a steering wheel puller, release the steering
wheel. Do not thread the steering wheel puller bolts
in more than 5 mm (0.2 in.). When removing the
steering wheel, take care not to move the front
wheels.
LEFT PADDLE
SHIFTER
RIGHT PADDLE
SHIFTER
STEERING
WHEEL
Remove the steering wheel bolt, then remove the
steering wheel.
VEHICLE
CONNECTORS
© 2014 American Honda Motor Co., Inc. – All Rights Reserved.
BII 51457 (1407)
QC02806AB
3 of 7