Download JPEG2000 Stand alone DVR User Guide

JPEG2000 Stand alone DVR User Guide
CHAP.5 PTZ camera control
5-1 PTZ camera installation
5-2 PTZ camera operation
…………………………………………………………………… 43
…………………………………………………………………… 44
CHAP.7 Software installation
7-1 Install Internet Relative Software
7-2 IRS operation
7-3 J2K VIEWER operation
7-4 J2K BACKUP process
7-5 J2K PLAYER operation
7-6 H.264 transmitter
7-7 Client software operation
7-8 CMS
7-9 DDNS setup and operation
……………………………………………………………………
……………………………………………………………………
……………………………………………………………………
……………………………………………………………………
……………………………………………………………………
……………………………………………………………………
……………………………………………………………………
……………………………………………………………………
……………………………………………………………………
45
45
47
48
49
51
52
58
65
……………………………………………………………………
……………………………………………………………………
……………………………………………………………………
……………………………………………………………………
……………………………………………………………………
67
69
70
74
75
Appendix
1. Record time table
2. System configuration
3. Firmware upgrade
4. Play only mode
5. Router setup
Disclaimer:
 The product names mentioned in this manual are used as identifications only, while the copyright of these
names
might belong to other companies.

The product spec and info are for reference only, and they may be updated from time to time without notification.
Caution

For you safety, unplug the power before moving the DVR, installing, or replacing any parts or hard drive.

Make sure all the power cable and wires are properly set up before using the DVR. Contact your distributor
immediately if there is any defect.


To avoid a short circuit, don’t leave any unnecessary parts inside the DVR.
Please avoid dramatic changes of the environment, such as dust, temperature, and humidity. Keep the DVR in a
temperature ranging from 5℃~40℃.

Keep the DVR in a well-ventilated place and away from any heat-generating objects.
-2-