Download LIP-8012E/8024E User Guide - Nine One One Communication Supply

LIP-8012E & LIP-8024E Gigabit Phone
User Guide
To activate Keypad Facility operation:
•
•
Press the KEYPAD FACILITY button to switch to keypad mode,
Dial as desired.
To deactivate Keypad Facility operation:
•
•
Press KEYPAD FACILITY ,
OR
Press a Feature or Flex button.
9.2.2
Using ISDN Supplementary Services
ISDN service providers may incorporate features similar
to those of Centrex. These ISDN Supplementary
services are provided on a subscription basis, and as
with Centrex, are accessed using the Flash button on
an iPECS phone.
Using supplementary services an ISDN line can be
placed on Hold and a second call placed on the line.
You may then alternate between the two held calls
(Broker Call) using the hold button. An ISDN line
conference can be established using the Flash and
Conf Soft buttons. A conference can also be placed on
hold.
While on an ISDN CO line, to access ISDN Supplementary
services:
•
•
Press Flash,
Press HOLD/SAVE , Conf, or CO line button to activate the
desired feature.
9.2.3
Activating ISDN Caller ID Restriction
iPECS Phone users can restrict the transmission of
Caller ID to the far-end. This may be a subscription
service of your carrier. Separate Flex buttons are
required to activate outgoing, Connected Line (COL),
and incoming, Calling Line ID (CLID) restriction.
To restrict Caller ID:
•
•
Lift the handset,
Press programmed CLIR/COLR button to place call.
63