1
Download 11.11 PVC Setup Screen
Transcript
Chapter 32 switch Commands This command sets the forward delay period (between 4 and 30 seconds) the switch waits before changing states. The following example sets the forward delay time to 15 seconds. ras> switch mstp fwdelay 15 32.9.5 switch mstp hellotime Command Syntax: switch mstp hellotime <hellotime-sec> This command sets the time interval (between 1 and 10 seconds) between BPDU (Bridge Protocol Data Units) configuration message generations by the root switch. The following example sets the hello time to 5 seconds. ras> switch mstp hellotime 5 32.9.6 switch mstp maxage Command Syntax: switch mstp maxage <maxage-sec> This command sets the maximum time (between 6 and 40 seconds) a switch can wait without receiving a BPDU before attempting to reconfigure. The following example sets the maximum age to 20 seconds. ras> switch mstp maxage 20 32.9.7 switch mstp maxhops Command Syntax: switch mstp maxhops <max-hops> This command sets the number of hops (between 1 and 255) in an MSTP region before the BPDU is discarded and the port information is aged. The following example sets the maximum hop count to 20. After 20 hops (or passing through 20 devices), a BPDU is dropped. ras> switch mstp maxhops 20 32.9.8 switch mstp priority Command Syntax: switch mstp priority <mstid> <priority> 634 MSC1000G User’s Guide
