Download Wildcat 9.0 User Guide
Transcript
maxgaming Qld Wildcat User Guide The Data Entry screen will calculate the net value by subtracting the Tare weight from the gross weight. Save the data as per normal procedures. Next time Data Entry is performed the dry weight will be populated where it is available so only the gross weight needs to be entered. 11.3.2 Zero Hoppers for Conversions/Retired EGMs To enter a $0 amount for a converted or retired EGM, the user will enter the TARE weight into the GROSS HOPPER WEIGHT column (Gross MINUS Tare = Hopper). This will give Wildcat a $0 value to calculate. Alternatively, NOT entering the TARE weight will give a $0 value also. 11.4 Correcting Data Entry Errors If you input the incorrect entry, click in the cell, delete the incorrect entry and input the corrected amount. If you have already saved the incorrect data, click DATA ENTRY and repeat the steps to bring up the information again. Click in the cell, delete the incorrect entry and input the corrected amount. Click SAVE and if enabled, the data entry change will print (Note: it will ONLY print the change, not the whole page) 11.5 Entering Data for Retired/Converted EGMs When entering data for retired/converted/changed EGMs, Wildcat will display two lines for each machine configuration; one line showing the old machine details and the other line showing the new details. Ensure when entering data that the correct data is aligned with the correct machine. As a rule always choose the machine name that the machine was previously or denomination (this should be found in an old configuration report). 11.6 Reset Data Option When a major mistake has been made i.e. if staff have entered information for an incorrect day, Wildcat has the facility to clear all data without having to go in and perform an adjustment for each EGM. 63