Download Mint WorkBench User Guide - Q-TECH

Mint WorkBench
The CAN2 Nodes tab displays:
The Connected, Group Master and Group Member columns are not applicable to CAN2.
Again, the reader is referred to the CAN Peripherals Hardware Guide (MN1255) for a full
explanation.
2.7.3
The Groups Tab
The Groups tab displays CAN Network groups, listing: Group number, Master Node number, and
Member node numbers.
Figure 19 CAN Window with Groups tab selected
Groups are configured at the terminal. The screenshot above is the result of executing the following
Mint commands:
groupmaster.3=1
groupmaster.4=2
group.3.2=1
group.4.1=1
The Mint commands groupmaster and group always refer to CAN1, and so the Groups tab
remains blank for CAN2.
2.8
Terminal
The Terminal window provides access to the Mint command line.
To enable the Terminal Window:
• Select Tools, Terminal or
• Enter [Ctrl]+[T] or
• Click the
icon:
MN1283 08.2000
23