Download InBalance User Guide

Wonderware Finland InBalance Module
68
In “Temperature”, “Pressure” and “Molar mass” tabs the meaning of fields “Type of
Measurement”, “Value”, “Value Source”, “”Value” as Primary data source” and “Max.
Error %” is the same as in “Mass/Volume” tab described above. There are 2 additional
checkboxes “Use global temperature value” and “Use global Molar mass value” in
“Temperature” and “Molar mass” tabs respectively. Setting these checkboxes defines that
temperature and molar mass values for the stream should be taken from global parameter
InBalance Ver 1.x User Manual Rev 1.4
PR0016xm14