Download USER MANUAL VERSION 5.06

slots 15 and 0 in the back panel. It will be possible to install as many audio
modules as data modules in the remaining slots free (1..14) in the back panel.
The connection between subracks will be made by using a standard 50 ways
SCSI cable.
This cable is supplied together with the units, if requested according to the
configuration inquired by the user.
The way to interconnect the subracks will be as follows:
ATTENTION:
The last connected subrack needs an additional extension board
(without connection cable) for buses finishing.
The extension boards have some jumpers which configuration depends on
the subrack they are installed in and the slots they occupy. Please see this
configuration as follows:
Jumpers configuration of the Extension board
Subrack
Slot
Jumper
Jumper
P1
P2
0 (Main Subrack)
15
OPEN
OPEN
1,3,5,7
1,3,5,7 (If it is the last subrack)
1,3,5,7 (If it is not the last subrack)
2,4,6,8
2,4,6,8
19
KRONOS User Manual V5.06
15
0
0
0
15
CLOSED
OPEN
OPEN
CLOSED
OPEN
CLOSED
OPEN
OPEN
OPEN
OPEN
Jumper P3
OPEN
OPEN
CLOSED
OPEN
OPEN
OPEN