Download User's Guide VacSimHigh Vacuum System - INTEC
Transcript
VACUUM SYSTEM DESIGN GUIDELINES Purpose of Simulation The purpose of your simulation is to model a system with sufficient accuracy to allow you to make design decisions based on the model. The model is NOT, and should not be, a perfect representation of the real physical system. You should only include those aspects of the system which you consider to be significant. The Single Gas Model VACSIM uses a single gas model for its calculations. This feature has been adopted because it is adequate for a large range of high vacuum systems which are vented either to dried air or nitrogen. The uncertainties in high vacuum pumpdown modelling arise from the variability in material outgassing rates. This variability far exceeds the differences between the pumping of air and of nitrogen, so the gas model uses a gas of molecular weight equal to the mean of that for air. Modelling Vacuum Components VACSIM provides a set of component parts which can be added to a system. These have been developed and tested in different 21